Home > Products > LED Light Sources >

LED Fyto-Panels

LED Fyto-Panels are primarily intended for installation in growth chambers, or for other similar applications where controlled, large-area illumination is of high importance. The Fyto-Panels provide high-intensity light with uniform light distribution. They are manufactured with maximum of two or three independent channels/colors (optionally also multi-color series); with each color being separately controllable in intensity. Far-red LEDs 735 nm (plus optionally deep-red LEDs 660 nm) are added so as to ensure optimal conditions for plant growth.

LED Fyto-Panel external dimension is 27 x 81 cm or 27 x 41 cm respectively. The panels are delivered with a mechanical rack and a power supply, which is positioned on the panel top side. They also come with hardware that enables to connect these panels up to a computer. LED Fyto-Panels can be mounted inside the growth chamber or on a self-built construction system.

LED Fyto-Panels need a PC for their operation. The basic control - ON/OFF and intensity setting - is performed through a PC program provided (included in the LED Fyto-Panel price).

Optionally, LED Fyto-Panels can be supplied with the Light Controller or Light Studio Software; they both enable precise control of the light mode, timing and intensity via user-defined protocols. In addition, special protocols for daylight mimicking or cloudy sky simulation may be provided. More information of the Light Controler and Light Studio may be found in the below panel or at the list of optional features and accessories on the right side of this page.

The panels are manufactured in three basic versions (A, B, C) and three "half" versions (labelled 1/2) that differ in power input and maximum reachable intensity (more information on single versions below or in the right tab).

New Multi-Color version LED Fyto-Panel has been developed and launched to the market in 2017. This Fyto-Panel can be equipped with up to 7 different colors - each color being separately controllable in intensity. Standard color setup covers full spectrum for plant growing: blue, green, red, deep-red, white, far-red, infra-red (other colors as an option).

  • Homogeneous light distribution over the desired area
  • Light irradiance in the range from 430 to 1,600 µmol(photon)/m2.s
  • Precise intensity control in the range of 1 % to 100%
  • Standard panel setup: cool white LEDs with added far-red LEDs (735 nm) and deep-red LEDs (660 nm); multi-color (up to 7 channels) version available
  • Minimum undesirable heating effects to experimental material
  • Independently programmable LED-based illumination controllable in its power, spectral composition and temporal modulation
  • Irradiance intensity control in basic setup; advanced user-defined protocol writing as an option
  • LED Fyto-Panel
  • Plant and algal research
  • Precisely controlled plant and algal cultivation
  • New lighting solutions
  • Growth chamber upgrading - replacement of old fluorescent tubes
  • Agricultural and biotechnology research
  • Biomedicine science
  • LED Illuminated Chamber
  • Spectral Specification of LEDs used in the Light Sources
    Color   Minimum Typical   Maximum
    Green   520 nm   530 nm   550 nm
    Cyan   490 nm   505 nm   520 nm
    Blue   460 nm   470 nm   490 nm
    Royal Blue   440 nm   447.5 nm   460 nm
    Red   620 nm   627 nm   645 nm
    Red-Orange   610 nm   617 nm   620 nm
    Amber   584.5 nm   590 nm   597 nm
  • Multicolor Spectra
    Graph of LED Spectral Specification
  • Far Red Spectrum
    Spectral Specification for Far Red LEDs
  • White Light Spectra
    White Light Spectra
  • Version A2:
    Dimension 27x81 cm; typical setup: 54 cool white LEDs + 8 far-red LEDs 735 nm); intensity up to 430 µmol(photon).m-2.s-1 (measured in 50 cm)
  • Version A3:
    Dimension 27x81 cm; typical setup; 54 cool white LEDs + 8 far-red LEDs 735 nm + 8 deep-red LEDs 660 nm); intensity up to 430 µmol(photon).m-2.s-1 (measured in 50 cm)
  • Version A2-1/2:
    Dimension 27x41 cm; 27 cool white LEDs + 4 far-red LEDs); intensity up to 350 µmol(photon).m-2.s-1 (measured in 50 cm)
  • Version A3-1/2:
    Dimension 27x41 cm; 27 cool white LEDs + 4 far-red LEDs + 8 deep-red LEDs 660 nm); intensity up to 350 µmol(photon).m-2.s-1 (measured in 50 cm)
  • Version B2:
    Dimension 27x81 cm; typical setup: 96 cool white LEDs + 8 far-red LEDs 735 nm); intensity up to 1,000 µmol(photon).m-2.s-1 (measured in 50 cm)
  • Version B3:
    Dimension 27x81 cm; typical setup: 96 cool white LEDs + 8 far-red LEDs 735 nm + 8 deep-red LEDs 660 nm); intensity up to 1,000 µmol(photon).m-2.s-1 (measured in 50 cm)
  • Version B2-1/2:
    Dimension 27x41 cm; 48 cool white LEDs + 4 far-red LEDs); intensity up to 900 µmol(photon).m-2.s-1 (measured in 50 cm)
  • Version B3-1/2:
    Dimension 27x41 cm; 48 cool white LEDs + 4 far-red LEDs 8 deep-red LEDs 660 nm); intensity up to 900 µmol(photon).m-2.s-1 (measured in 50 cm)
  • Version C2:
    Dimension 27 x 81 cm; typical setup: 150 cool white LEDs + 8 far-red LEDs); intensity up to 1,500 µmol(photon).m-2.s-1 (measured in 50 cm)
  • Version C2-1/2:
    Dimension 27 x 41 cm; 75 cool white LEDs + 4 far-red LEDs); intensity up to 1,500 µmol(photon).m-2.s-1 (measured in 50 cm)
  • Version MULTI:
    Dimension 27 x 81 cm; spectrum composition: blue 450-460 nm + green 520-530 nm + red 618-630 nm + deep-red 660 nm + cool white + far-red LEDs 740 nm + infra-red LEDs 850 nm; intensity up to 1,400 µmol(photon).m-2.s-1 (measured in 50 cm, total for all colors)
  • Multi-Color LED Fyto-Panel
    Multi-Color LED Fyto-Panel - White LEDs ON
  • User-friendly, four-button operation
  • Precise control over the light mode, intensity and timing (seconds to hours)
  • Supports up to 8 lights/colors
  • Each light /color can be configured and controlled independently
  • Light modulation according to a predefined function (continuous, pulse, sine, triangle)
  • Two light/dark phases
  • User-Defined Custom Protocol with up to 224 intervals (optional)
  • Daylight Protocol for cloudy sky simulation (optional)
  • No PC needed
  • Light Controller LC 200
    Light Controller LC 200
  • User-Defined Custom Protocol
    User-Defined Custom Protocol Uploader Software
  • User-friedly GUI for protocol writing
  • Day/night simulation - dawn and dusk simulation
  • Precise control over the light mode, intensity and timing - timing from seconds to hours
  • Supports unlimited number of logical light channels formed from up to 254 physical light devices - FytoPanels
  • Each logical channel can be configured and programmed independently
  • Fully programmable light modulation - built from user-defined segments (continuous light and ramp)
  • Light Studio Software Window
    Light Studio Software - Example
  • Panel External Dimension:
    81 x 27 cm: versions A2, A3, B2, B3, C2
    41 x 27 cm: Versions A2-1/2, A3-1/2, B2-1/2, B3-1/2, C2-1/2
  • Number of High-Intensity LEDs:
    Version A2, A3: 54 pcs
    Version B2, B3: 96 pcs
    Version C2: 150 pcs + 8 pcs
    Version A2-1/2, A3-1/2: 27 pcs
    Version B2-1/2, B3-1/2: 48 pcs
    Version C2-1/2: 75 pcs
    Irradiated power: 100 lm/W per 1 LED
  • Standard Light Color:
    Cool white + far-red 735 nm (optionally deep red 660 nm or other color)
    Other colors as an option
  • Additional, Low-Intensity Far Red LEDs:
    Version A2, A3: 8 pcs
    Version B2, B3: 8 pcs
    Version C2: 8 pcs
    Version A2-1/2, A3-1/2: 4 pcs
    Version B-1/2, B3-1/2: 4 pcs
    Version C2-1/2: 4 pcs
    Irradiated power: 300 mW/1 LED
  • LED Lifespan:
    60 000 to 70 000 hours of continuous lighting
  • Collimating Optics:
    +/- 6 degrees for standard LEDs
    no collimating optics for IR LEDs
  • Light Intensity Control:
    0 - 100 % of total output
  • Maximum Reachable Intensity:
    Version A2, A3: 430 / 300 µmol(photon).m-2.s-1 (measured in 50 cm / 100 cm from the source)
    Version A2-1/2, A-3-1/2: 350 / 280 µmol(photon).m-2.s-1 (measured in 50 cm / 100 cm from the source)
    Version B2, B3: 1,000 / 800 µmol(photon).m-2.s-1 (measured in 50 cm / 100 cm from the source)
    Version B2-1/2, B3-1/2: 900 / 750 µmol(photon).m-2.s-1 (measured in 50 cm / 100 cm from the source)
    Version C2: 1,500 / 1,200 µmol(photon).m-2.s-1 (measured in 50 cm / 100 cm from the source)
    Version C2-1/2: 1,500 / 1,100 µmol(photon).m-2.s-1 (measured in 50 cm / 100 cm from the source)
  • Power Input:
    Version A2, A3: 210 W
    Version B2, B3: 360 W
    Version C2: 580 W
    Version A2-1/2, A3-1/2: 130 W
    Version B2-1/2, B3-1/2: 220 W
    Version C2-1/2: 320 W
  • Approximate Heating Output:
    Version A2, A3: 170 W
    Version B2, B3: 290 W
    Version C2: 450 W
    Version A2-1/2, A3-1/2: 100 W
    Version B2-1/2, B3-1/2: 180 W
    Version C2-1/2: 260 W
  • Operating Conditions:
    Temperature: 0 to 55 ºC; 32 to 130 ºF Relative humidity: 0 to 80 % (non-condensing; no contact with dripping water must be ensured)
  • Storage Conditions:
    Temperature: -10 to +60 ºC; 14 to +140 ºF Relative humidity: 0 to 80 % (non-condensing; no contact with dripping water must be ensured)
  • Approximate Weight:
    13 kg
  • Warranty:
    1 year parts and labor
  • FYTO-Panel - Version A
    LED Fyto-Panel - Version A
  • FYTO-Panel - Version B
    LED Fyto-Panel - Version B
  • FYTO-Panel - Version C
    LED Fyto-Panel - Version C
  • FYTO-Panel - Version B-1/2 with Light Controller LC 200
    LED Fyto-Panel - Version B-1/2

Pricing

  • Orders and Payments
  • LED Fyto-Panel - Version A2
    2.590,- €
  • LED Fyto-Panel - Version A3
    2.890,- €
  • LED Fyto-Panel - Version A2-1/2
    1.990,- €
  • LED Fyto-Panel - Version A3-1/2
    2.290,- €
  • LED Fyto-Panel - Version B2
    2.990,- €
  • LED Fyto-Panel - Version B3
    3.290,- €
  • LED Fyto-Panel - Version B2-1/2
    2.360,- €
  • LED Fyto-Panel - Version B3-1/2
    2.660,- €
  • LED Fyto-Panel - Version C2
    3.990,- €
  • LED Fyto-Panel - Version C2-1/2
    3.390,- €
  • LED Fyto-Panel - Version MULTI
    3.990,- €
  • Light Studio Software for Fyto-Panels
    990,- €
  • Light Controller LC 200
    990,- €
  • User-Defined Custom Protocol
    400,- €
  • Daylight Protocol
    100,- €
  • Additional Protective Glasses *
    19,- €

LED Fyto-Panel Versions

LED Fyto-Panel – Version A-3
Panel outside dimensions: 81 cm x 27 cm. Maximum intensity: up to 430 µmol(photon).m-2.s-1 (measured in 50 cm); up to 300 µmol(photon).m-2.s-1 (measured in 100 cm). Number of channels: up to 3. Typical 3-channel setup: 54 high-power LEDs (cool white) + 8 far-red LEDs (735 nm) + 8 deep-red LEDs (660 nm).


LED Fyto-Panel – Version B-3
Panel outside dimensions: 81 cm x 27 cm. Maximum intensity: up to 1,000 µmol(photon).m-2.s-1 (measured in 50 cm). Number of channels: up to 3. Typical 3-channel setup: 96 high-power LEDs (cool white) + 8 far-red LEDs (735 nm) + 8 deep-red LEDs (660 nm).


LED Fyto-Panel – Version C-3
Panel outside dimensions: 81 cm x 27 cm. Maximum intensity: up to 1,500 µmol(photon).m-2.s-1 (measured in 50 cm). Number of channels: up to 3. Typical 3-channel setup: 150 high-power LEDs (cool white) + 8 far-red LEDs (735 nm) + 8 deep-red LEDs (660 nm).


LED Fyto-Panel – Version A-1/2
Panel outside dimensions: 41 cm x 27 cm. Maximum intensity: up to 350 µmol(photon).m-2.s-1 (measured in 50 cm); up to 280 µmol(photon).m-2.s-1 (measured in 100 cm). Mounted are 27 high-power LEDs (cool white) + 4 far-red LEDs (735 nm).


LED Fyto-Panel – Version B-1/2
Panel outside dimensions: 41 cm x 27 cm. Maximum intensity: up to 1,000 µmol(photon).m-2.s-1 (measured in 50 cm); up to 750 µmol(photon).m-2.s-1 (measured in 100 cm). Mounted are 48 high-power LEDs (cool white) + 4 far-red LEDs (735 nm).


LED Fyto-Panel – Version C-1/2
Panel outside dimensions: 41 cm x 27 cm. Maximum intensity: up to 1,600 µmol(photon).m-2.s-1 (measured in 50 cm); up to 1,100 µmol(photon).m-2.s-1 (measured in 100 cm). Mounted are 75 high-power LEDs (cool white) + 4 far-red LEDs (735 nm).


LED Fyto-Panel – MULTI
Panel outside dimensions: 81 cm x 27 cm. Maximum intensity: up to 1,400 µmol(photon).m-2.s-1 (measured in 50 cm, total for all colors). Spectrum composition: blue 450-460 nm + green 520-530 nm + red 618-630 nm + deep-red 660 nm + cool white + far-red LEDs 740 nm + infra-red LEDs 850 nm.

Optional Features and Accessories

Light Studio Software (for Use with Fyto-Panels)
Light Studio Software is a PC solution for precise control over the light mode, intensity and timing - (seconds to hours). It can control unlimited number of logical light channels, formed from up to 254 physical light devices - FytoPanels. Each logical channel can be configured independently. Light modulation is fully programmable, built from user-defined segments (continuous light and ramp). The software offers flexibility regarding the protocol composition and timing. There are just two predefined items – constant element and ramp element. The protocol is then built from these two. A user can also add light channels to various groups and control them as one item/with one protocol.


Light Controller LC 200
LC 200 is a hardware, stand-alone solution for precise control of light characteristics and day/night simulation in LED Fyto-Panels. It provides precise control over the light mode, intensity and timing (seconds to days). It can control up to 8 logical light channels, formed from up to 254 physical light devices - FytoPanels. Each logical light channel can be configured and controlled independently. Light Controller supports light modulation according to a predefined function (continuous, pulse, sine, triangle), user-programmed function (optional), or daylight simulation (optional). No PC is needed for this device operation.


Additional Protective Glasses
Radiation safety glasses protecting against excessive LED radiation – equipped with side cover and protective filters. One pair of glasses is provided with the device free of charge.


User-Defined Custom Protocol
Optional feature to the Light Controller LC 200: when uploaded to Light Controller, this Protocol can support up to 224 light phase intervals, each defined by light intensity and duration.


Daylight Protocol
Optional feature to the Light Controller LC 200: when uploaded to Light Controller, the Daylight Protocol serves for cloudy skies simulations - several adjustable parameters. It includes also an additional program for "cloud visualization" on a PC.


Download

Software
Nothing

Documents
LED Spectra
Type: PDF
Language: English
Size: 121 KB


LED Light Source Manual
Type: PDF
Language: English
Size: 302 KB


LED Fyto-Panels Manual
Type: PDF
Language: English
Size: 2.2 MB


Light Controller Manual
Type: PDF
Language: English
Size: 2.4 MB


Light Studio Guide
Type: PDF
Language: English
Size: 424 KB


Other LED Light Sources

LED Light Source SL 3500

LED Light Source SL 3500 serves for generation of strong, controllable irradiance. It is manufactured in three basic versions that differ in the panel size: 13 x 13 cm, 20 x 20 cm, or 30 x 20 cm. Offered are single-color, bi-color or tri-color panel versions. The LED Light Source comes with an adjustable stand.


LED Fyto-Panels

LED Fyto-Panels are primarily intended for installation in growth chambers or for other similar applications where controlled large-area illumination is of high importance.
The panel dimension is 27 cm x 81 cm and its whole surface is mounted with high-intensity white LEDs complemented with far red LEDs (735 nm).


Video Gallery